Publicaciones en las que colabora con JOSE MARIA FRANCO GOMEZ (30)

2023

  1. Oleogels and reverse emulsions stabilized by acetylated Kraft lignins

    International Journal of Biological Macromolecules, Vol. 242

2022

  1. Lignin-enriched residues from bioethanol production: Chemical characterization, isocyanate functionalization and oil structuring properties

    International Journal of Biological Macromolecules, Vol. 195, pp. 412-423

  2. Lignocellulosic Materials for the Production of Biofuels, Biochemicals and Biomaterials and Applications of Lignocellulose-Based Polyurethanes: A Review

    Polymers, Vol. 14, Núm. 5

  3. Structuring natural deep eutectic solvents with epoxidised lignin-enriched residues: a green alternative to petroleum-based thickened formulations

    Journal of Molecular Liquids, Vol. 360

2021

  1. Characterization and analysis of the carbonation process of a lime mortar obtained from phosphogypsum waste

    International Journal of Environmental Research and Public Health, Vol. 18, Núm. 12

  2. Lignin effect in castor oil-based elastomers: Reaching new limits in rheological and cushioning behaviors

    Composites Science and Technology, Vol. 203

  3. Rheology and adhesion performance of adhesives formulated with lignins from agricultural waste straws subjected to solid-state fermentation

    Industrial Crops and Products, Vol. 171

  4. Toward UV-Triggered Curing of Solvent-Free Polyurethane Adhesives Based on Castor Oil

    ACS Sustainable Chemistry and Engineering, Vol. 9, Núm. 33, pp. 11032-11040

2020

  1. Cellulose pulp‐ and castor oil‐based polyurethanes for lubricating applications: Influence of streptomyces action on barley and wheat straws

    Polymers, Vol. 12, Núm. 12, pp. 1-15

  2. Corrigendum to “Phosphogypsum waste lime as a promising substitute of commercial limes: A rheological approach” [Cement Concr. Compos. 95 (2019) 205–216] (Cement and Concrete Composites (2019) 95 (205–216), (S0958946518306449), (10.1016/j.cemconcomp.2018.11.007))

    Cement and Concrete Composites

  3. Evaluation of lignin-enriched side-streams from different biomass conversion processes as thickeners in bio-lubricant formulations

    International Journal of Biological Macromolecules, Vol. 162, pp. 1398-1413

  4. Green and facile procedure for the preparation of liquid and gel-like polyurethanes based on castor oil and lignin: Effect of processing conditions on the rheological properties

    Journal of Cleaner Production, Vol. 277

2019

  1. Influence of solid-state fermentation with Streptomyces on the ability of wheat and barley straws to thicken castor oil for lubricating purposes

    Industrial Crops and Products, Vol. 140

  2. Phosphogypsum waste lime as a promising substitute of commercial limes: A rheological approach

    Cement and Concrete Composites, Vol. 95, pp. 205-216

  3. Solid-state fermentation with "Streptomyces" to enhance the thickening properties of cellulose pulp and lignin in castor oil

    Polímeros para el siglo XXI: X Congreso de Jóvenes Investigadores en Polímeros (JIP 2019). Universidad de Burgos, 20-23 mayo de 2019 (Burgos, España)

2018

  1. Valorization of Soda Lignin from Wheat Straw Solid-State Fermentation: Production of Oleogels

    ACS Sustainable Chemistry and Engineering, Vol. 6, Núm. 4, pp. 5198-5205

  2. Valorization of kraft lignin as thickener in castor oil for lubricant applications

    Journal of Renewable Materials, Vol. 6, Núm. 4, pp. 347-361

2017

  1. Rheology of lignin-based chemical oleogels prepared using diisocyanate crosslinkers: Effect of the diisocyanate and curing kinetics

    European Polymer Journal, Vol. 89, pp. 311-323

2016

  1. Impact of natural sources-derived antioxidants on the oxidative stability and rheological properties of castor oil based-lubricating greases

    Industrial Crops and Products, Vol. 87, pp. 297-303

2015

  1. Gel-Like Dispersions of HMDI-Cross-Linked Lignocellulosic Materials in Castor Oil: Toward Completely Renewable Lubricating Grease Formulations

    ACS Sustainable Chemistry and Engineering, Vol. 3, Núm. 9, pp. 2130-2141