Publicaciones (33) Publicaciones en las que ha participado algún/a investigador/a

2005

  1. A comparative study of the effect of refining on organosolv pulp from olive trimmings and kraft pulp from eucalyptus wood

    Bioresource Technology, Vol. 96, Núm. 10, pp. 1125-1129

  2. A voltammetric study of the adsorption-desorption processes in the reduction of the herbicide picloram on mercury electrodes

    Journal of the Electrochemical Society, Vol. 152, Núm. 12

  3. Bombeo de grasas lubricantes a través de tuberías

    Ingenieria Quimica, Vol. 37, Núm. 422, pp. 150-165

  4. Comportamiento de ligantes asfálticos modificados con polímeros

    Ingenieria Quimica, Vol. 37, Núm. 429, pp. 112-116

  5. Deformation and fracture behavior of polypropylene-ethylene vinyl alcohol blends compatibilized with ionomer Zn2+

    Journal of Applied Polymer Science, Vol. 98, Núm. 3, pp. 1271-1279

  6. Effect of composition and processing on the linear viscoelasticity of synthetic binders

    European Polymer Journal, Vol. 41, Núm. 6, pp. 1429-1438

  7. Effective area in powder compacts under uniaxial compression

    Materials Science and Engineering A, Vol. 395, Núm. 1-2, pp. 208-213

  8. Effective stress during biaxial compression of powder aggregates

    Materials Science and Technology, Vol. 21, Núm. 8, pp. 917-920

  9. El trabajo de explotación del granito en la Sierra Norte: por una recuperación de la cultura patrimonial de la piedra

    Minería y metalurgia históricas en el sudoeste europeo

  10. Electrical conductivity of sintered powder compacts

    Powder Metallurgy, Vol. 48, Núm. 4, pp. 343-344

  11. Emulsiones alimentarias estabilizadas con proteínas vegetales (CP)

    Proteínas alimentarias y coloides de interés industrial (JIPAC 2003) : basado en las presentaciones realizadas en las II Jornadas Internacionales de Proteínas y Coloides de Interés Industrial celebradas en el Instituro de la Grasa del 4 al 6 de Junio

  12. Experimental study of grease flow in pipelines: Wall slip and air entrainment effects

    Chemical Engineering and Processing: Process Intensification, Vol. 44, Núm. 7, pp. 805-817

  13. High-strength PM aluminium by milling in ammonia gas and sintering

    Scripta Materialia, Vol. 53, Núm. 10, pp. 1165-1170

  14. Influence of crumb rubber concentration on the rheological behavior of a crumb rubber modified bitumen

    Energy and Fuels, Vol. 19, Núm. 5, pp. 1984-1990

  15. Influence of milling media on the microstructure and mechanical properties of mechanically milled and sintered aluminium

    Journal of Materials Science, Vol. 40, Núm. 15, pp. 3911-3915

  16. Influence of polymer concentration on the microstructure and rheological properties of high-density polyethylene (HDPE)-modified bitumen

    Energy and Fuels, Vol. 19, Núm. 3, pp. 1148-1152

  17. Leguminosas leñosas de rápido crecimiento para la producción de biomasa

    Vida rural, Núm. 207, pp. 58-64

  18. Microstructural control of sintered mechanically alloyed Al-1%Ni material

    Scripta Materialia, Vol. 52, Núm. 5, pp. 341-345

  19. Mixing rheometry for studying the manufacture of lubricating greases

    Chemical Engineering Science

  20. Paper from olive tree residues

    Industrial Crops and Products, Vol. 21, Núm. 2, pp. 211-221