Publicaciones en las que colabora con María Eugenia Eugenio Martín (20)

2021

  1. Influence of cellulose characteristics on pyrolysis suitability

    Processes, Vol. 9, Núm. 9

  2. Obtaining fermentable sugars from a highly productive elm clone using different pretreatments

    Energies, Vol. 14, Núm. 9

2015

  1. Enhancement of TCF and ECF bleaching processes by urea and enzymatic pretreatments: Optimization of a laccase-mediator pretreatment

    BioResources, Vol. 10, Núm. 2, pp. 2289-2304

  2. Influence of process variables on the properties of laccase biobleached pulps

    Bioprocess and biosystems engineering, Vol. 38, Núm. 1, pp. 113-123

2012

  1. Influence of eucalyptus globulus kraft pulping severity on the rheological properties of gel-like cellulose pulp dispersions in castor oil

    Industrial and Engineering Chemistry Research, Vol. 51, Núm. 29, pp. 9777-9782

  2. Neural models for optimizing lignocellulosic residues composting process

    Waste and Biomass Valorization, Vol. 3, Núm. 3, pp. 319-331

  3. Steam explosion and enzymatic pre-treatments as an approach to improve the enzymatic hydrolysis of Eucalyptus globulus

    Biomass and Bioenergy, Vol. 42, pp. 97-106

2011

  1. Preparation and characterization of gel-like dispersions based on cellulosic pulps and castor oil for lubricant applications

    Industrial and Engineering Chemistry Research, Vol. 50, Núm. 9, pp. 5618-5627

2007

  1. Variations in fiber length and some pulp chemical properties of Leucaena varieties

    Industrial Crops and Products, Vol. 26, Núm. 2, pp. 142-150

2006

  1. Evaluation of holm oak (quercus ilex) wood as alternative source for cellulose pulp

    Cellulose Chemistry and Technology, Vol. 40, Núm. 1-2, pp. 53-61

  2. Influence of the pulping and TCF bleaching operating conditions on the properties of pulp and paper obtained from olive tree residues

    Cellulose Chemistry and Technology, Vol. 40, Núm. 3-4, pp. 237-242

2005

  1. Paper from olive tree residues

    Industrial Crops and Products, Vol. 21, Núm. 2, pp. 211-221

  2. Soda pulping of sunflower stalks. Influence of process variables on the resulting pulp

    Journal of Industrial and Engineering Chemistry, Vol. 11, Núm. 3, pp. 387-394

2004

  1. Ethanol Pulping from Tagasaste (Chamaecytisus proliferus L.F. ssp palmensis). A New Promising Source for Cellulose Pulp

    Industrial and Engineering Chemistry Research, Vol. 43, Núm. 8, pp. 1875-1881

2003

  1. Hydrothermal and pulp processing of Eucalyptus

    Bioresource Technology, Vol. 88, Núm. 1, pp. 61-68

  2. Influence of process variables in the soda-anthraquinone pulping of sunflower stalks on the properties of the resulting paper

    Afinidad: Revista de química teórica y aplicada, Vol. 60, Núm. 507, pp. 487-494

  3. Modelling vinasse/cotton waste ratio incubation for optimum composting

    Chemical Engineering Journal, Vol. 93, Núm. 3, pp. 233-240

  4. Optimization of hydrogen peroxide in totally chlorine free bleaching of cellulose pulp from olive tree residues

    Bioresource Technology, Vol. 87, Núm. 3, pp. 255-261

2002

  1. Bleaching of olive tree residues pulp with peracetic acid and comparative study with hydrogen peroxide

    Industrial and Engineering Chemistry Research, Vol. 41, Núm. 15, pp. 3518-3525

2001

  1. Deslignificación con oxígeno y peróxido de hidrógeno de pasta kraft de podas de olivo

    Afinidad: Revista de química teórica y aplicada, Vol. 58, Núm. 496, pp. 421-426