Publicaciones en las que colabora con ANTONIO ABAD CUADRI VEGA (21)

2019

  1. Fomento de la metodología AICLE en estudios de Grado de la Escuela Técnica Superior de Ingeniería de la Universidad de Huelva

    XXVII Congreso Universitario de Innovación Educativa en las Enseñanzas Técnicas: Alcoy 17-19 de Junio de 2019 : actas

2018

  1. Selection of ethylene-vinyl-acetate properties for modified bitumen with enhanced end-performance

    Rheologica Acta, Vol. 57, Núm. 1, pp. 71-82

2016

  1. Binder Design for Asphalt Mixes with Reduced Temperature: EVA Modified Bitumen and its Emulsions

    Transportation Research Procedia

  2. Formulation and processing of recycled-low-density-polyethylene-modified bitumen emulsions for reduced-temperature asphalt technologies

    Chemical Engineering Science, Vol. 156, pp. 197-205

  3. Influence of polymer melting point and Melt Flow Index on the performance of ethylene-vinyl-acetate modified bitumen for reduced-temperature application

    Materials and Design, Vol. 96, pp. 180-188

  4. Linear and non-linear viscoelastic behavior of SBS and LDPE modified bituminous mastics

    Construction and Building Materials, Vol. 123, pp. 464-472

2015

  1. The development of polyurethane modified bitumen emulsions for cold mix applications

    Materials and Structures/Materiaux et Constructions, Vol. 48, Núm. 10, pp. 3407-3414

2014

  1. Bitumen modifiers for reduced temperature asphalts: A comparative analysis between three polymeric and non-polymeric additives

    Construction and Building Materials, Vol. 51, pp. 82-88

  2. Effect of transesterification degree and post-treatment on the in-service performance of NCO-functionalized vegetable oil bituminous products

    Chemical Engineering Science, Vol. 111, pp. 126-134

  3. Influence of the prepolymer molecular weight and free isocyanate content on the rheology of polyurethane modified bitumens

    European Polymer Journal, Vol. 57, pp. 151-159

  4. Procedimiento de espumación/modificación simultáneo de betunes asfálticos mediante reutilización de fosfoyeso

    Carreteras: Revista técnica de la Asociación Española de la Carretera, Núm. 198, pp. 71-80

  5. Processing of bitumens modified by a bio-Oil-Derived polyurethane

    Fuel, Vol. 118, pp. 83-90

  6. Valorization of phosphogypsum waste as asphaltic bitumen modifier

    Journal of Hazardous Materials, Vol. 279, pp. 11-16

2013

  1. End-performance evaluation of thiourea-modified bituminous binders through viscous flow and linear viscoelasticy testing

    Rheologica Acta, Vol. 52, Núm. 2, pp. 145-154

  2. Isocyanate-functionalized castor oil as a novel bitumen modifier

    Chemical Engineering Science, Vol. 97, pp. 320-327

  3. Thermal, rheological and microstructural characterisation of commercial biodegradable polyesters

    Polymer Testing, Vol. 32, Núm. 4, pp. 716-723

2012

  1. Betunes modificados con polímeros reactivos formulados con MDI (4,4’‐diphenylmethane diisocyanate) y aceite de ricino

    Nuevos desafíos para la Ciencia y Tecnología de Polímeros [Recurso electrónico]: VI Congreso Nacional de Jóvenes Investigadores en Polímeros

  2. Enhancing the viscoelastic properties of bituminous binders via thiourea-modification

    Fuel, Vol. 97, pp. 862-868

  3. Rheological behaviour of polymer-modified bituminous mastics: A comparative analysis between physical and chemical modification

    Construction and Building Materials, Vol. 27, Núm. 1, pp. 234-240

2011

  1. Bitumen chemical modification by thiourea dioxide

    Fuel, Vol. 90, Núm. 6, pp. 2294-2300