Publicaciones en las que colabora con María Eugenia Eugenio Martín (38)

2024

  1. Assessment of Lignin Residues from Bioethanol Production of Olive Stones as Green Chemical Thickener of Epoxidized Linseed Oil

    Journal of Polymers and the Environment, Vol. 32, Núm. 9, pp. 4507-4524

  2. Bioethanol lignin-rich residue from olive stones for electrospun nanostructures development and castor oil structuring

    International Journal of Biological Macromolecules, Vol. 255

2023

  1. Kraft lignins from different poplar genotypes obtained by selective acid precipitation and their use for the production of electrospun nanostructures

    Reactive and Functional Polymers, Vol. 191

2022

  1. Different Kraft lignin sources for electrospun nanostructures production: Influence of chemical structure and composition

    International Journal of Biological Macromolecules, Vol. 214, pp. 554-567

  2. Emulsion Stabilization by Cationic Lignin Surfactants Derived from Bioethanol Production and Kraft Pulping Processes

    Polymers, Vol. 14, Núm. 14

  3. Populus alba L., an autochthonous species of spain: A source for cellulose nanofibers by chemical pretreatment

    Polymers, Vol. 14, Núm. 1

  4. Solid-State Fermentation with Streptomyces as an Ecofriendly Route to Tune Lignin Properties and Its Use as a Binder in Adhesive Formulation

    ACS Sustainable Chemistry and Engineering, Vol. 10, Núm. 31, pp. 10403-10416

2021

  1. A sustainable methanol-based solvent exchange method to produce nanocellulose-based ecofriendly lubricants

    Journal of Cleaner Production, Vol. 319

  2. Eco-Friendly Oleogels from Functionalized Kraft Lignin with Laccase SilA from Streptomyces ipomoeae: An Opportunity to Replace Commercial Lubricants

    ACS Sustainable Chemistry and Engineering, Vol. 9, Núm. 12, pp. 4611-4616

  3. Influence of cellulose characteristics on pyrolysis suitability

    Processes, Vol. 9, Núm. 9

  4. Obtaining fermentable sugars from a highly productive elm clone using different pretreatments

    Energies, Vol. 14, Núm. 9

  5. Rheology and adhesion performance of adhesives formulated with lignins from agricultural waste straws subjected to solid-state fermentation

    Industrial Crops and Products, Vol. 171

2020

  1. Cellulose pulp‐ and castor oil‐based polyurethanes for lubricating applications: Influence of streptomyces action on barley and wheat straws

    Polymers, Vol. 12, Núm. 12, pp. 1-15

  2. Evaluation of lignin-enriched side-streams from different biomass conversion processes as thickeners in bio-lubricant formulations

    International Journal of Biological Macromolecules, Vol. 162, pp. 1398-1413

2018

  1. Assessing cellulose nanofiber production from olive tree pruning residue

    Carbohydrate Polymers, Vol. 179, pp. 252-261

  2. Valorization of Soda Lignin from Wheat Straw Solid-State Fermentation: Production of Oleogels

    ACS Sustainable Chemistry and Engineering, Vol. 6, Núm. 4, pp. 5198-5205

  3. Valorization of kraft lignin as thickener in castor oil for lubricant applications

    Journal of Renewable Materials, Vol. 6, Núm. 4, pp. 347-361

2015

  1. Enhancement of TCF and ECF bleaching processes by urea and enzymatic pretreatments: Optimization of a laccase-mediator pretreatment

    BioResources, Vol. 10, Núm. 2, pp. 2289-2304

  2. Influence of process variables on the properties of laccase biobleached pulps

    Bioprocess and biosystems engineering, Vol. 38, Núm. 1, pp. 113-123

2012

  1. Influence of eucalyptus globulus kraft pulping severity on the rheological properties of gel-like cellulose pulp dispersions in castor oil

    Industrial and Engineering Chemistry Research, Vol. 51, Núm. 29, pp. 9777-9782