Publicaciones (38) Publicaciones en las que ha participado algún/a investigador/a

2009

  1. Bitumen modification with reactive and non-reactive (virgin and recycled) polymers: A comparative analysis

    Journal of Industrial and Engineering Chemistry, Vol. 15, Núm. 4, pp. 458-464

  2. Characterization of sepiolite-gel-based formulations for controlled release of pesticides

    Applied Clay Science, Vol. 46, Núm. 3, pp. 289-295

  3. Compost como subproducto en la fabricación de pastas de papel

    Ingeniería química, Núm. 476, pp. 104-115

  4. Development of new green lubricating grease formulations based on cellulosic derivatives and castor oil

    Green Chemistry, Vol. 11, Núm. 5, pp. 686-69

  5. Droplet-size distribution and stability of lipid injectable emulsions

    American Journal of Health-System Pharmacy, Vol. 66, Núm. 2, pp. 162-166

  6. Effect of processing temperature on the bitumen/MDI-PEG reactivity

    Fuel Processing Technology, Vol. 90, Núm. 4, pp. 525-530

  7. Effects of the composting and the heating rate on biomass gasification

    Energy and Fuels, Vol. 23, Núm. 2, pp. 951-957

  8. El aprendizaje cooperativo como estrategia metodológica en Ingeniería Técnica Industrial

    Huellas de innovación docente en las aulas universitarias (Netbiblo), pp. 47-62

  9. El origen del sistema solar y del meteorito Puerto Lápice

    Servei de Comunicació i Publicacions

  10. Electrical conductivity and porosity relationship in metal foams

    Journal of Porous Materials, Vol. 16, Núm. 6, pp. 675-681

  11. Ethanol and soda pulping of tagasaste wood: neural fuzzy modeling

    Cellulose Chemistry and Technology, Vol. 43, Núm. 7-8, pp. 295-306

  12. Evaluating environmental parameters for minimum ammonium losses during composting of trimming residues

    Journal of the Air and Waste Management Association, Vol. 59, Núm. 7, pp. 790-800

  13. High-pressure viscosity of used motor oil/vacuum residue blends

    Fuel, Vol. 88, Núm. 9, pp. 1595-1601

  14. Influence of bitumen colloidal nature on the design of isocyanate-based bituminous products with enhanced rheological properties

    Industrial and Engineering Chemistry Research, Vol. 48, Núm. 18, pp. 8464-8470

  15. Influence of bulking agent on sewage sludge composting process

    Bioresource Technology, Vol. 100, Núm. 23, pp. 5827-5833

  16. Influence of soap/polymer concentration ratio on the rheological properties of lithium lubricating greases modified with virgin LDPE

    Journal of Industrial and Engineering Chemistry, Vol. 15, Núm. 5, pp. 687-693

  17. Integral valorization of two legumes by autohydrolysis and organosolv delignification

    Bioresource Technology, Vol. 100, Núm. 1, pp. 440-445

  18. Kinetic models based in biomass components for the combustion and pyrolysis of sewage sludge and its compost

    Journal of Analytical and Applied Pyrolysis, Vol. 86, Núm. 1, pp. 108-114

  19. Low environmental impact bleaching sequences for attaining high brightness level with eucalyptus SPP pulp

    Brazilian Journal of Chemical Engineering, Vol. 26, Núm. 1, pp. 11-22

  20. Modelling of parameters for optimization of maturity in composting trimming residues

    Bioresource Technology, Vol. 100, Núm. 23, pp. 5859-5864