Publicaciones en colaboración con investigadores/as de University of Lorraine (20)

2022

  1. A Review of Rigid Polymeric Cellular Foams and Their Greener Tannin-Based Alternatives

    Polymers, Vol. 14, Núm. 19

  2. Eco-Friendly Production of Hyper-Cross-Linked Polymers Using Mechanosynthesis and Bioresources: A Critical Review

    ACS Sustainable Chemistry and Engineering, Vol. 10, Núm. 49, pp. 16090-16112

2021

  1. Enhanced tribological properties of wind turbine engine oil formulated with flower-shaped MoS2 nano-additives

    Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol. 620

2020

  1. Improved tribological properties, thermal and colloidal stability of poly-α-olefins based lubricants with hydrophobic MoS2 submicron additives

    Journal of Colloid and Interface Science, Vol. 562, pp. 91-101

  2. Investigating the properties of humins foams, the porous carbonaceous materials derived from biorefinery by-products

    Applied Materials Today, Vol. 20

  3. Modelling the production of solid and liquid products from the hydrothermal carbonisation of two biomasses

    Industrial Crops and Products, Vol. 151

2019

  1. Effect of morphology and hydrophobization of MoS2 microparticles on the stability of poly-α-olefins lubricants

    Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol. 572, pp. 174-181

2018

  1. Destructive vs. non-destructive methods for the mechanical characterisation of tannin-based thermoset foams

    Polymer Testing, Vol. 69, pp. 332-339

  2. Impact of the formulation of biosourced phenolic foams on their fire properties

    Polymer Degradation and Stability, Vol. 153, pp. 1-14

  3. Mechanically blown wall-projected tannin-based foams

    Industrial Crops and Products, Vol. 113, pp. 316-323

  4. Modelling the reactions of cellulose, hemicellulose and lignin submitted to hydrothermal treatment

    Industrial Crops and Products, Vol. 124, pp. 919-930

  5. Optimisation of “green” tannin-furanic foams for thermal insulation by experimental design

    Materials and Design, Vol. 139, pp. 7-15

2017

  1. Combined Effect of Porosity and Surface Chemistry on the Electrochemical Reduction of Oxygen on Cellular Vitreous Carbon Foam Catalyst

    ACS Catalysis, Vol. 7, Núm. 11, pp. 7466-7478

  2. Fire-resistant tannin-ethylene glycol gels working as rubber springs with tuneable elastic properties

    Journal of Materials Chemistry A, Vol. 5, Núm. 28, pp. 14720-14732

  3. High added-value products from the hydrothermal carbonisation of olive stones

    Environmental Science and Pollution Research, Vol. 24, Núm. 11, pp. 9859-9869

  4. Mechanical properties of model vitreous carbon foams

    Carbon, Vol. 116, pp. 562-571

  5. Modelling the physical properties of glasslike carbon foams

    Journal of Physics: Conference Series

  6. Stability analysis of tannin-based foams using multiple light-scattering measurements

    European Polymer Journal, Vol. 87, pp. 318-330

2016

  1. Hydrophobisation of tannin-based foams by covalent grafting of silanes

    Industrial Crops and Products, Vol. 92, pp. 116-126

  2. Improving water repellence and friability of tannin-furanic foams by oil-grafted flavonoid tannins

    BioResources, Vol. 11, Núm. 3, pp. 7754-7768