Parámetros de resistencia al corte de las formaciones limo-arenosas de los Cabezos de Huelva

  1. M. De la Concepción 1
  2. E. García-Navarro 1
  3. Manuel A. Camacho 1
  1. 1 Universidad de Huelva
    info

    Universidad de Huelva

    Huelva, España

    ROR https://ror.org/03a1kt624

Revista:
Geotemas (Madrid)

ISSN: 1576-5172

Any de publicació: 2016

Títol de l'exemplar: IX CONGRESO GEOLÓGICO DE ESPAÑA

Número: 16

Pàgines: 965-968

Tipus: Article

DIALNET GOOGLE SCHOLAR lock_openAccés obert editor

Altres publicacions en: Geotemas (Madrid)

Resum

This project presents the results of the shear strength in soil samples belonging to the "Huelva-Bonares sands" Formations, which are made of sandy-silty materials. These materials cause the largest topographical slopes of the city, known as "Cabezos de Huelva". Some identification and sample status tests have been carried out, and the fracture resistance has been calculated by drained Direct Shear tests.Since the soils are overconsolidated, normal stresses above and below the Preconsolidated Pressure (Pc’) have been used in the Direct Shear tests to determine the Cohesion (C’) and the Angle of internal friction (Ø’). This is a mechanical behaviour limit of the soils that must be considered in the sliding stability researches in the "cabezos" of the city. This Pc’ has been determined by laboratory consolidation tests and the lithostatic pressure that the overlying geological materials produce.

Fuente de los datos: Dialnet