Publicaciones en las que colabora con PEDRO PARTAL LOPEZ (41)

2018

  1. Selection of ethylene-vinyl-acetate properties for modified bitumen with enhanced end-performance

    Rheologica Acta, Vol. 57, Núm. 1, pp. 71-82

  2. Sustainable asphalt mixes manufactured with reclaimed asphalt and modified-lignin-stabilized bitumen emulsions

    Construction and Building Materials, Vol. 173, pp. 662-671

2017

  1. Assessment of modified lignin cationic emulsifier for bitumen emulsions used in road paving

    Materials and Design, Vol. 131, pp. 242-251

2016

  1. Binder Design for Asphalt Mixes with Reduced Temperature: EVA Modified Bitumen and its Emulsions

    Transportation Research Procedia

  2. Formulation and processing of recycled-low-density-polyethylene-modified bitumen emulsions for reduced-temperature asphalt technologies

    Chemical Engineering Science, Vol. 156, pp. 197-205

  3. Influence of polymer melting point and Melt Flow Index on the performance of ethylene-vinyl-acetate modified bitumen for reduced-temperature application

    Materials and Design, Vol. 96, pp. 180-188

  4. Linear and non-linear viscoelastic behavior of SBS and LDPE modified bituminous mastics

    Construction and Building Materials, Vol. 123, pp. 464-472

2015

  1. The development of polyurethane modified bitumen emulsions for cold mix applications

    Materials and Structures/Materiaux et Constructions, Vol. 48, Núm. 10, pp. 3407-3414

2014

  1. Effect of transesterification degree and post-treatment on the in-service performance of NCO-functionalized vegetable oil bituminous products

    Chemical Engineering Science, Vol. 111, pp. 126-134

  2. Influence of the prepolymer molecular weight and free isocyanate content on the rheology of polyurethane modified bitumens

    European Polymer Journal, Vol. 57, pp. 151-159

  3. Procedimiento de espumación/modificación simultáneo de betunes asfálticos mediante reutilización de fosfoyeso

    Carreteras: Revista técnica de la Asociación Española de la Carretera, Núm. 198, pp. 71-80

  4. Processing of bitumens modified by a bio-Oil-Derived polyurethane

    Fuel, Vol. 118, pp. 83-90

2013

  1. Development of protein-based bioplastics with antimicrobial activity by thermo-mechanical processing

    Journal of Food Engineering, Vol. 117, Núm. 2, pp. 247-254

  2. End-performance evaluation of thiourea-modified bituminous binders through viscous flow and linear viscoelasticy testing

    Rheologica Acta, Vol. 52, Núm. 2, pp. 145-154

  3. Isocyanate-functionalized castor oil as a novel bitumen modifier

    Chemical Engineering Science, Vol. 97, pp. 320-327

  4. Thermal, rheological and microstructural characterisation of commercial biodegradable polyesters

    Polymer Testing, Vol. 32, Núm. 4, pp. 716-723

2012

  1. Betunes modificados con polímeros reactivos formulados con MDI (4,4’‐diphenylmethane diisocyanate) y aceite de ricino

    Nuevos desafíos para la Ciencia y Tecnología de Polímeros [Recurso electrónico]: VI Congreso Nacional de Jóvenes Investigadores en Polímeros

  2. Enhancing the viscoelastic properties of bituminous binders via thiourea-modification

    Fuel, Vol. 97, pp. 862-868

  3. Rheological behaviour of polymer-modified bituminous mastics: A comparative analysis between physical and chemical modification

    Construction and Building Materials, Vol. 27, Núm. 1, pp. 234-240

2011

  1. Bitumen chemical modification by thiourea dioxide

    Fuel, Vol. 90, Núm. 6, pp. 2294-2300