Publicaciones en las que colabora con ANTONIO MARIA BORRERO LOPEZ (23)

2023

  1. Oleogels and reverse emulsions stabilized by acetylated Kraft lignins

    International Journal of Biological Macromolecules, Vol. 242

2022

  1. A Mathcad-based educational experience to address the design of nonisothermal plug flow reactors

    Computer Applications in Engineering Education, Vol. 30, Núm. 4, pp. 1145-1160

  2. Development of Bio-Based Materials: Synthesis, Characterization and Applications

    Polymers

  3. Lignin-enriched residues from bioethanol production: Chemical characterization, isocyanate functionalization and oil structuring properties

    International Journal of Biological Macromolecules, Vol. 195, pp. 412-423

  4. Lignocellulosic Materials for the Production of Biofuels, Biochemicals and Biomaterials and Applications of Lignocellulose-Based Polyurethanes: A Review

    Polymers, Vol. 14, Núm. 5

  5. Populus alba L., an autochthonous species of spain: A source for cellulose nanofibers by chemical pretreatment

    Polymers, Vol. 14, Núm. 1

  6. Solid-State Fermentation with Streptomyces as an Ecofriendly Route to Tune Lignin Properties and Its Use as a Binder in Adhesive Formulation

    ACS Sustainable Chemistry and Engineering, Vol. 10, Núm. 31, pp. 10403-10416

2021

  1. Assessment of sustainability of bio treated lignocellulose-based oleogels

    Polymers, Vol. 13, Núm. 2, pp. 1-12

  2. Characterization and analysis of the carbonation process of a lime mortar obtained from phosphogypsum waste

    International Journal of Environmental Research and Public Health, Vol. 18, Núm. 12

  3. Eco-Friendly Oleogels from Functionalized Kraft Lignin with Laccase SilA from Streptomyces ipomoeae: An Opportunity to Replace Commercial Lubricants

    ACS Sustainable Chemistry and Engineering, Vol. 9, Núm. 12, pp. 4611-4616

  4. Lignin effect in castor oil-based elastomers: Reaching new limits in rheological and cushioning behaviors

    Composites Science and Technology, Vol. 203

  5. Rheology and adhesion performance of adhesives formulated with lignins from agricultural waste straws subjected to solid-state fermentation

    Industrial Crops and Products, Vol. 171

  6. Toward UV-Triggered Curing of Solvent-Free Polyurethane Adhesives Based on Castor Oil

    ACS Sustainable Chemistry and Engineering, Vol. 9, Núm. 33, pp. 11032-11040

2020

  1. Cellulose pulp‐ and castor oil‐based polyurethanes for lubricating applications: Influence of streptomyces action on barley and wheat straws

    Polymers, Vol. 12, Núm. 12, pp. 1-15

  2. Corrigendum to “Phosphogypsum waste lime as a promising substitute of commercial limes: A rheological approach” [Cement Concr. Compos. 95 (2019) 205–216] (Cement and Concrete Composites (2019) 95 (205–216), (S0958946518306449), (10.1016/j.cemconcomp.2018.11.007))

    Cement and Concrete Composites

  3. Evaluation of lignin-enriched side-streams from different biomass conversion processes as thickeners in bio-lubricant formulations

    International Journal of Biological Macromolecules, Vol. 162, pp. 1398-1413

  4. Green and facile procedure for the preparation of liquid and gel-like polyurethanes based on castor oil and lignin: Effect of processing conditions on the rheological properties

    Journal of Cleaner Production, Vol. 277

2019

  1. Influence of solid-state fermentation with Streptomyces on the ability of wheat and barley straws to thicken castor oil for lubricating purposes

    Industrial Crops and Products, Vol. 140

  2. Phosphogypsum waste lime as a promising substitute of commercial limes: A rheological approach

    Cement and Concrete Composites, Vol. 95, pp. 205-216

  3. Solid-state fermentation with "Streptomyces" to enhance the thickening properties of cellulose pulp and lignin in castor oil

    Polímeros para el siglo XXI: X Congreso de Jóvenes Investigadores en Polímeros (JIP 2019). Universidad de Burgos, 20-23 mayo de 2019 (Burgos, España)